Ohaus Discovery Semi-Micro and
Analytical Balances
(Click on image for brochure)
Capacity: 81 to 310 g
Readability: 0.01 to 0.1 mg
The professional choice for analytical applications
The NEW Ohaus Discovery series of semi-micro and
analytical balances combine unmatched weighing performance
with Ohaus’ innovative SmarText™ software, making the
Discovery, Ohaus' best performing & easiest to use balance.
|
AND GH Series
(Click on image for brochure)
250g x 0.0001g /101g x 0.00001g
- High Capacity in semi micro range – (101 g x 0.01
mg)
- Internal Calibration – both one touch and automatic
- Multiple Weighing Units – g, mg, ct, oz, ozt, dwt,
mom, t,TL
- Counting & Percentage Modes
- Standard Data Interface – RS232C Bidirectional Comms
- Data Memory Function – Up to 200 sets of data stored
- Underhook Weighing capability
- Full GLP/GMP/GCP/ISO Compliance
- Standard WinCT Software – load data directly into
your P.C.
- ID Number – can be set to identify balance in GLP
|
Ohaus Adventurer Pro
Analytical Balances
(Click on image for brochure)
Capacity: 65 to 260 g
Readability: 0.1 mg
The most complete balance in its class
Offering the most standard features and options than any
other balance in its class, the Adventurer Pro has
the flexibility to meet your application needs.
|
AND GR Series
(Click on image for brochure)
| GR-200 |
210g x 0.1mg |
| GR-300 |
310g x 0.1mg |
| GR-202 |
42/210g x 0.01/0.1mg |
- Advanced, reliable, accurate weighing.
- Full digital calibration using internal motor driven
masses
- Two layer housing construction minimises the
negative effects of ambient temperature changes.
- 11 weighing units plus counting & percentage.
- Range of capacities and resolutions.
- Built in underhook capability.
- Automatic self calibration on ambient temperature
changes.
- One touch calibration with one press of the CAL key.
- Pull out quick reference card gives convenient
operation instructions.
- Data memory to store up to 200 sets of weighing
data.
- GLP compliant data output format to match quality
systems.
- Sealed keypad protecting against spills and dust.
|
Ohaus Pioneer Analytical
Balances
(Click on image for brochure)
Capacity: 65 g to 210 g
Readability: 0.1 mg
The Best Balance For Basic Weighing!
Pioneer analytical balances are designed for basic routine
weighing in a variety of laboratory, industrial and
education applications. With the right combination of
performance and features, Pioneer balances offer
uncomplicated performance for all your basic weighing needs.
|
AND Vibro Visomenter
(Click on image for brochure)
- High Measurement Accuracy
Tuning-fork Vibration Method provides for
excellent repeatability of 1% of reading for viscosity
measurement by our Sine-wave Vibro Viscometers SV-10 /
SV-100.
- Low Viscosity Measurement
And Wide Measurement Range
Low viscosity of 0.3 mPa·s ( cP ) to high
viscosity of 10,000 mPa·s ( cP ) sample fluid can be
measured by the SV-10 and 1000mPa s (cP) to 100,000mPa s
(cP) by the SV-100, without changing the sensor plates.
- Real-Time Measurement
The sensor plate is thin and small, in area and
in mass, making it is less influenced by the temperature
change of the sample fluid and as a result the viscosity
measurement tracks the change of viscosity of the sample
fluid.
- Temperature Measurement
It is very important to measure the temperature
of the fluid correctly because the viscosity is very
much dependent upon this temperature. The SV series can
detect an accurate temperature immediately because the
fluid and the detection unit (sensor plates), with small
surface area/thermal capacity, reach thermal equilibrium
in only a few seconds.
- Continuous measurement
The SV series, Tuning-fork Vibration Method does
not cause damage to the sample fluid and allows
measurement of cloud point of samples such as surface
active agents and of surface/interface changes such as
wet ability because of its excellent feature of a wide
measurement range without the need to replace the sensor
plates.
- Viscosity Calibration
With Viscosity Standard, viscosity calibration
can be easily done. 1 point calibration or 2 points
calibration is selectable in the calibration mode.
- Non-Newtonian Sample
Viscosity Measurement
Thin sensor plates allow little deformation of
sample texture and thus enable measurement of stable
viscosity values.
- Foaming Sample Measurement
The low drive frequency of 30Hz allows
measurement of foaming samples without breaking minute
foams and with less scattering of larger foams.
- Flowing Sample Measurement
Even the viscosity of flowing samples can be
measured, including liquid in turbulent flow. This
provides field management with identical data to that
obtained in the laboratories.
- Separated type model
The SV series comprise a separate Display Unit
and Main Unit offering excellent placement flexibility.
- Vacuum Fluorescent Display
Reading errors are avoided with the easy-to-read,
large, clear display: 13mm height for viscosity
measurement and 11mm height for temperature measurement.
- Small Sample Size
The standard sample cup requires just over 35 ml
thus reducing waste.
- Easy Cleaning
Due to the simple structure, the SV series sensor
plates, temperature sensor and the protector made of
stainless steel (SUS 304) can all be easily and quickly
cleaned.
- Sol and Gel Measurement
Sol and Gel samples can be measured during the
change of material state.
- Standard RS-232C Interface
RS-232C interface and a data connection cable
(DB25-DB9) are supplied as standard for your PC or
printer connectivity.
|
